Motion in the ComMotionControlling 4 motors, reading their encoders, monitoring their current draw requires a lot of processor pins so the first thing I did was to make the shield I²C controlled.This way only two pins were needed leaving all the other pins free for use with other shields, circuits o..
Features:1.Pin configuration is compatible with S4A (V1.5).2.Arduino Pro Mini 328 5V 16mhz Bootloader.3.ATmega328P processor @ 16MHz with 32K FLASH, 2K SRAM and 1K EEPROM.4.Dual motor driver rated at 2.5A per motor.5.Motor controller pins can be isolated and used as standard digital and PWM pins.6...
The micro Magician robot controller is the perfect choice for small/low voltage robot projects.It can be programmed using a USB cable and the Arduino IDE, which is free from the internet.The controller comes with the LillyPad(168) bootloader. Each unit comes pre-assembled and tested. Supplied in an..
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102) Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..