Your Cart

Arduino controller

1. suitable for arduino UNO Board, Quick Disassembly, Simple and Convenient2. Input voltage range: 6V-12.6V, it can provide 3.6A maximum current, which can support multiple steering motors to ensure normal operation.3. On-board high performance continuous current 3A (peak output ..
Motion in the ComMotionControlling 4 motors, reading their encoders, monitoring their current draw requires a lot of processor pins so the first thing I did was to make the shield I²C controlled.This way only two pins were needed leaving all the other pins free for use with other shields, circuits o..
1, MCU: ATmega32U4, more internal resources2, input voltage range: 6V-12.6V, LM2676 can provide up to 3.6A current, can support multiple servos to ensure normal operation3, onboard high performance dual 5A integrated H-bridge motor driver External PWM control signal, high temperature automatic prote..
Power input: +20V - +7VPower output: 5V/1A, 5V/5A, 3.3V/1AControl steering gear channel: 24Communication input: TTLActuator drive resolution: about 5US, about 0.45 degreesBaud rate setting: 115200Driving pulse range: 2500 - 500 Hardware protection:A)dual power supply voltage, one for the power supp..
Features:1.Pin configuration is compatible with S4A (V1.5).2.Arduino Pro Mini 328 5V 16mhz Bootloader.3.ATmega328P processor @ 16MHz with 32K FLASH, 2K SRAM and 1K EEPROM.4.Dual motor driver rated at 2.5A per motor.5.Motor controller pins can be isolated and used as standard digital and PWM pins.6...
MCU: ATmega8A, Frequency: 16MHZInput voltage range: 5.4V ~ 9VLow dropout voltage: 250mV @ 500mA, 450mV @ 1AOnboard high-performance dual 2A independent MOSFET H-bridge motor driverAn external PWM control signalBluetooth module interface (standard Otani Electronics Bluetooth module) can be used wit..
The micro Magician robot controller is the perfect choice for small/low voltage robot projects.It can be programmed using a USB cable and the Arduino IDE, which is free from the internet.The controller comes with the LillyPad(168) bootloader. Each unit comes pre-assembled and tested. Supplied in an..
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102)  Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..
Showing 1 to 10 of 10 (1 Pages)