Your Cart

All Products

Wires,10cm. male-male,1p(pack) 1 pack=100pcs If no special requirements,the color will be picked randomly. ..
Arm length: 21cm2 servos: RA001B(S06NF STD servo) 1pc +RA001C (S05NF STDservo) 1PC..
WheelOuter diameterΦ78mmInner hole connects to servos,another connects to DG01D or DG02S motorThis wheel match with all DG01D and DG02S serial or ServoThe chassis with these wheels:..
Encoders use custom made 8-pole magnets and 2 haff-effect sensors to provide 2 square waves, 90 degree out of phase with a total of 16 state changes per motor revolution. These encodoers can operate with both 3.3V and 5V logic sustems and have reverse polarity protection built into the sensors. And..
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
Discharge method: hot melt extrusion moldingForming method: Three-dimensional moldingPrint range: unlimitedSpinning speed: adjustableTemperature: 80℃-195℃ AdjustableEquipment working voltage: 5V 2ANozzle diameter: 0.7mmComsumable diameter: 1.75mmCompatible with high and low temperature dual mod..
Support 3D printer teaching materialsDiameter: 1.75mmSpecifications: 0.6kg/volumeDensity: 1.24g/cm3Melt index: 5g/10min(190℃/2.16kg) or betterTensile strength is at least 65MpaBending strength is at least 87Mpa1 year warrantySafety specifications provide effective safety inspection report copies wi..
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102)  Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..
Specification:outer dia:48mminner dia:4mmthickness:20mmPack with screws, no hub needed. One pack include:omni wheel  4pcs M3*20mm copper pipe 4pcsM3*25mm screw   4pcsM3*30mm screw   4pcstapping screw   4pcsThere are 4 sections in the wheel; each section has 3pcs rubber connecting each other by a 3*..
Arm length: 13cmwith MK IIrobotic claw2 servos: RA001C (S05NF STD) 2pcs..
Include: 2 wheels, 2 motors, 2 encoder kit, screwsEncoder type:  8-pole neodymium magnet and hall-effect sensorEncoder output: Open drain with short circuit protection Encoder voltage: 3V – 24V with reverse polarity protectionEncoder resolution: 8 state changes / revolution when mounted on the outp..
Wires,10cm.female-female,1p(pack) 1 pack=100pcs  If no special requirements,the color will be picked randomly. ..
17 degrees of freedom dancing robot full set of humanoid robot ROHS 17 degrees of freedom dancing robot full set of humanoid robot ROHS
2-3 Days
(1) body parametersHeight: 365mm;Weight: about 1.68KG (with battery);Joint: A total of 17 joint; head: one degree of freedom, arms six degrees of freedom, the legs 10 degrees of freedom;Load new robot dedicated 24-channel high-end digital servos and robot controllers, with special lithium polymer r..
One, three-degree-of-freedom paw with servo protection & cushioning device2, short U PTZ bracket 13,3KG metal tooth steering gear 14, 13KG metal tooth steering gear 25, metal rudder 3!6, send a small wrench! !..
SpecificationsTracking bandwidth: 1.7CMPerimeter: 39.5.CM..
Showing 241 to 264 of 419 (18 Pages)