Encoders use custom made 8-pole magnets and 2 haff-effect sensors to provide 2 square waves, 90 degree out of phase with a total of 16 state changes per motor revolution. These encodoers can operate with both 3.3V and 5V logic sustems and have reverse polarity protection built into the sensors. And..
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102) Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..
Specification:outer dia:48mminner dia:4mmthickness:20mmPack with screws, no hub needed. One pack include:omni wheel 4pcs M3*20mm copper pipe 4pcsM3*25mm screw 4pcsM3*30mm screw 4pcstapping screw 4pcsThere are 4 sections in the wheel; each section has 3pcs rubber connecting each other by a 3*..
Include: 2 wheels, 2 motors, 2 encoder kit, screwsEncoder type: 8-pole neodymium magnet and hall-effect sensorEncoder output: Open drain with short circuit protection Encoder voltage: 3V – 24V with reverse polarity protectionEncoder resolution: 8 state changes / revolution when mounted on the outp..
(1) body parametersHeight: 365mm;Weight: about 1.68KG (with battery);Joint: A total of 17 joint; head: one degree of freedom, arms six degrees of freedom, the legs 10 degrees of freedom;Load new robot dedicated 24-channel high-end digital servos and robot controllers, with special lithium polymer r..
One, three-degree-of-freedom paw with servo protection & cushioning device2, short U PTZ bracket 13,3KG metal tooth steering gear 14, 13KG metal tooth steering gear 25, metal rudder 3!6, send a small wrench! !..
This compact PCB is just 95mm x 70mm (3.75inch x 2.75inch) and is a perfect companion for the Spider robot controller.These outputs are suitable for interrupt generation and high resolution speed control.The mixing circuit takes the 8 inputs of the 4 quadrature encoders and generates 4 outputs. As ..
This powerful motor has 2 different gearbox options: And it used with Neodymium iron boron magnet,this motor is more power than the other motors. 75:1 gearbox motor (RS003A)The gears are all steel and the outputshaft is 4mm dia.Voltage=6V (7.5V max), no load current=350mA, stall current=3.4A, stall..