Your Cart

All Products

Wires,20cm. male-male,1p(pack) 1 pack=100pcs If no special requirements,the color will be picked randomly. ..
This gripper made from 3mm thick aluminium, with 6 servos.Comes pre-assembled in a plastic bag...
The micro Magician robot controller is the perfect choice for small/low voltage robot projects.It can be programmed using a USB cable and the Arduino IDE, which is free from the internet.The controller comes with the LillyPad(168) bootloader. Each unit comes pre-assembled and tested. Supplied in an..
1.You can use the 1~6MM chuck ,or use various grinding tools;2. All metal structure, special metal micro machine tool;3.Custom coupling joint with fixed auxiliary hole;4.Suitable for various processing range; 5.Processing materials: wood, integrated circuit board, organic glass, soft metal etc....
Power supply 3~5V;Anti-light interference;White LED, can control bright and off;Detects the color of non-illuminating objects;The best detection distance is 1cm...
1:48 gear motors 1 pairsWheels 1 pairsMaterial bagMaterial bagBattery holder (you can choose 1 from these):4XAA with DC head/5XAA with 2 PINS female head the kit containstwo platform assemblytwo wheels with tires with a diameter of 65 mmtwo dc motors with gearsmetal slug podporowametal and plastic c..
Suggested Voltage:4.5V DC No load Speed:140rpm No Load Current:190mA(max.250mA) min Size:20*20*64There gear motors, 130 model, 140 model, 260 model, 280 model and many other micro-motors, please consult contact!Use: There are scientific electronic products, electric robot body type..
Wires,10cm. male-male,1p(pack) 1 pack=100pcs If no special requirements,the color will be picked randomly. ..
Arm length: 21cm2 servos: RA001B(S06NF STD servo) 1pc +RA001C (S05NF STDservo) 1PC..
WheelOuter diameterΦ78mmInner hole connects to servos,another connects to DG01D or DG02S motorThis wheel match with all DG01D and DG02S serial or ServoThe chassis with these wheels:..
Encoders use custom made 8-pole magnets and 2 haff-effect sensors to provide 2 square waves, 90 degree out of phase with a total of 16 state changes per motor revolution. These encodoers can operate with both 3.3V and 5V logic sustems and have reverse polarity protection built into the sensors. And..
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102)  Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..
Specification:outer dia:48mminner dia:4mmthickness:20mmPack with screws, no hub needed. One pack include:omni wheel  4pcs M3*20mm copper pipe 4pcsM3*25mm screw   4pcsM3*30mm screw   4pcstapping screw   4pcsThere are 4 sections in the wheel; each section has 3pcs rubber connecting each other by a 3*..
Arm length: 13cmwith MK IIrobotic claw2 servos: RA001C (S05NF STD) 2pcs..
Include: 2 wheels, 2 motors, 2 encoder kit, screwsEncoder type:  8-pole neodymium magnet and hall-effect sensorEncoder output: Open drain with short circuit protection Encoder voltage: 3V – 24V with reverse polarity protectionEncoder resolution: 8 state changes / revolution when mounted on the outp..
Showing 217 to 240 of 399 (17 Pages)