Technical parameter:
1, the use of customized ultra quiet high-speed built-in fan motor;
2, the base uses the jet anode oxidation treatment;
3, using the European standard aluminum T type inner groove;
4, motor speed: 20000 RPM / min;
5, input voltage / current / power: 12V/3A/36W, switching power supply to the voltage of 240V - 110V;
6, transformer with over current, over voltage, over heat protection;
7, lathe processing material maximum diameter: 50mm;
8, lathe processing material length: 150mm;
9, X axis slider stroke: 150mm;
Chuck: 1-6mm, 10;
Three, 11 claw chuck can clamp the workpiece's maximum diameter of 50mm;
12, four claw chuck metal can clamp the workpiece's maximum diameter of 50mm (optional);
13 and spindle box (spindle box behind assist fastening holes) and the motor box is a metal structure, a hand wheel, a gear, small slider, long slide, connecting block, three claw chuck (optional metal four jaw independent chuck), belt protection cover, tool clamping claw etc. with all metal structure, fuselage without plastic parts;
14, center high 25mm, center distance 150mm;
15, suitable for processing: wood, soft metal (copper, aluminum, etc.), organic glass, plastic, etc..
Product features:
1. The main parts of the machine tool are electroplating process or the ink jet anodic oxidation process;
2, Z hand wheel shaft, the X axis of the handwheel, tailstock handwheel use electroplating process, with accuracy of 0.02 mm scale line (scale line for forming a mold, non paste), increase the precision machining of the workpiece, the machine handwheel by 3 / 4 semicircle structure, convenient disassembly and assembly machine connecting block;
3, the small slider, large slider side with anti loose nut design, prevent the machine used in the process of vibration caused by too large gap, improve the processing accuracy;
4, to prevent the hole screw slide, the connection block using the square nut, improve the stability and service life of the connection block;
5, a connecting block adopts the dovetail type structure, and machine tool parts of each slot phase matching, improve the stability and machining precision of the machine tool;
6, the machine adopts safe corner processing technology, to prevent the skin from scratch;
7, the lathe is matched with the metal claw single chuck, four metal claw single chuck can clamp shaped workpieces, such as square workpiece, ellipse workpiece, hexagon workpiece, increase the using range of the lathe.
