Servo & Motor
This powerful motor has 2 different gearbox options:And it used with Neodymium iron boron magnet,this motor is more power than the other motors. 75:1 gearbox motor (RS003A)The gears are all steel and the outputshaft is 4mm dia.Voltage=6V (7.5V max), no load current=350mA, stall current=3.4A, stall ..
$15.80
Introduction:The servo gimbal can be used for the development and learning of smart car robots.The servos set up the ultrasonic gimbal to scan obstacles about 180 degrees in front.The obstacle distance data can be obtained and sent to the SCM to drive the smart car or the robot to turn around...
$13.40
Hot
Suggested Voltage:4.5V DC No load Speed:58rpm No Load Current:190mA(max.250mA) Torque:800gf.cm min Size:20*20*64There gear motors, 130 model, 140 model, 260 model, 280 model and many other micro-motors, please consult contact!Use: There are scientific electronic products, electric robot body type,..
$6.99
Encoders use custom made 8-pole magnets and 2 haff-effect sensors to provide 2 square waves, 90 degree out of phase with a total of 16 state changes per motor revolution. These encodoers can operate with both 3.3V and 5V logic sustems and have reverse polarity protection built into the sensors. And..
$26.80
Voltage:3V DCNo load Speed:140rpmNo Load Current:125mA(max.170mA)Torque:800gf.cm minSize: 43*45*15mmSupplied in re-sealable plastic bag with cardboard header6V ≤250mA 250±10% rpm3V≤160mA110±10% rpm..
$6.99
TT motor mounting bracket is one of essential parts of making robots. It is very easy and fast to mount and dismount. It will give an excellant experience of making robot.One set includes:2*bracket,2*M3 nut;2*M3*8 flat screws(stainless steel),2*M2.5*15 round screws. ..
$12.99
The LBD gear motor is our little black duck servo with the control circuit removed.This gives you s small, strong, lightweight geared motor in a standard miniature servo housing with a ball raced output shaft that is perfect for small robots...
$5.90
TT motor mounting bracket is one of essential parts of making robots. It is very easy and fast to mount and dismount. It will give an excellant experience of making robot.One set includes:2*bracket,2*M3 nut2*M3*8 flat screws(stainless steel)2*M3*18 round screws. ..
$12.99
This is a standard servo with nylon gears that has been factory modified for continuous rotation. The wheel is 38mm dia. With a rubber tyre. Dimensions: 41x38x20mm Weight:38g Voltage: 4.8 - 6V Temperature 0 - 60 degrees celcius Speed: 0.15sec / 60 degrees Torque 3.5Kg/cm @ 4.8V..
$22.50
This powerful motor has 2 different gearbox options:And it used with Neodymium iron boron magnet,this motor is more power than the other motors. 75:1 gearbox motor (RS003A)The gears are all steel and the outputshaft is 4mm dia.Voltage=6V (7.5V max), no load current=350mA, stall current=3.4A, stall ..
$30.00
Product parameters: 1. System support: Windows/ Linux/ Openwrt;2. Standard pixels: 300,000 pixels (480P resolution);3. Output format: YUYV;4. Focus mode: manually adjust the focus;5. Rotation angle: 360° free rotation;6. Connection method: USB2.0 line plug;7. Size: 110*65mm;8. Weight: 53g...
$29.66
Product parametersSize: 20*15*25mmShaft length: 8mmShaft diameter: 2mmLength: 38mmWidth: 20mmHeight: 15mmVoltage: 1-6VReference current: 0.35-0.4A3V speed: 17000-18000 revolutions/min..
$15.28
This magnetic sensor fits near the back wheel and allows you to measure speed and distance...
$6.40
Product parameters:Motor diameter: 27.8mmMotor height: 38mm (excluding front and rear bearing sleeves)Output shaft: 2.3mmOutput shaft length: 95mmWeight: 86gVoltage: DC12V~24VCurrent: 0.07A-0.11ASpeed: 5300RPM-10800RPMTorque: 108g.cm..
$3.99
Motor parameters:1. Output rate: 150±10%rpm;2. Load current: 1200mA (Max);3. Stall current: 4500mA (Max);4. Locking torque: 9.5kgNaN;5. Load speed: 100±10%rpm;6. Load torque: 3000gNaN;7. Load noise: 56dB;8. Operating voltage: 9V;9. Shaft size: 14.5mm;10. Axial clearance: 0.05-0.50mm;11. Screw size: ..
$11.33
Encoder board specification1. Board size: 26*22*1.2mm2. Terminal pin definition: G: hall power negative; H1: hall H1 output signal, square wave; H2: hall H2 output signal, square wave; V: hall power positive; M+: motor positive pole; M-: motor negative pole;Remark: 1. The vol..
$7.00
-250x250.jpg "High quality Miniature LER DC gearbox motor Mini TT smart car motor 3-6V 100rpm ROHS")
Description:LER miniature gearbox motorVoltage: DC 3V-6VSpeed: 3V 50±10%rpm 6V 100±10%rpmGear ratio: 1:120Size: 30*14*20mmWeight: 7gConditions of Standard Operation:Suggested Voltage: 3.0V DC Constant between motor terminalsDirection of rotation: Bi-directionsGear box position: All directionsStorage..
$6.99