Menu
Your Cart

Robot Controller

Robot Controller
1. suitable for arduino UNO Board, Quick Disassembly, Simple and Convenient2. Input voltage range: 6V-12.6V, it can provide 3.6A maximum current, which can support multiple steering motors to ensure normal operation.3. On-board high performance continuous current 3A (peak output ..
$19.50
Motion in the ComMotionControlling 4 motors, reading their encoders, monitoring their current draw requires a lot of processor pins so the first thing I did was to make the shield I²C controlled.This way only two pins were needed leaving all the other pins free for use with other shields, circuits o..
$32.88
TPA3110 2x15W Bluetooth Audio Power Amplifier Board for Bluetooth SpeakerProduct informationProduct name: Bluetooth digital power amplifier boardAudio input: Wireless BluetoothPower output: Two channels 15W+15WReceiving distance > 10 metersSuitable impedance: 4,6,8,10Ω speaker speakerSupply voltage:..
$8.99
Tda7492p Bluetooth digital power amplifier 2x25w dual channel DIY sound box refittingProduct description:1) Power: 2.1 Interface DC 10-25V power supply (with reverse power protection)2) Audio input: Bluetooth receiver3) Output Impedance: 8 ohms Best (can drive 4,6,8,16ohm impedance speakers)4) Ampli..
$12.99
The Jetson Nano™ Developer Kit delivers the compute performance to run modern AI workloads at unprecedented size, power, and cost. Developers, learners, and makers can now run AI frameworks and models for applications like image classification, object detection, segmentation, and speech processing. ..
$120.00
Introductionmicro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a variety of on-board modules, including a 5x5 LED matrix (also suppor..
$19.60
Magician:bitMicro:bit expansion board1 :Left motor drive interface, motor drive maximum support 3A2 :Right motor drive interface, motor drive maximum support 3A3: Power switch and indicator light, turn on bright red4: Power input interface, minimum 6.4V, maximum 8.4V, with anti-backconnection protec..
$14.50
1, MCU: ATmega32U4, more internal resources2, input voltage range: 6V-12.6V, LM2676 can provide up to 3.6A current, can support multiple servos to ensure normal operation3, onboard high performance dual 5A integrated H-bridge motor driver External PWM control signal, high temperature automatic prote..
$25.00
Raspberry Pi 4 Model B Raspberry Pi 4 Model B
Free 2-3 Days
Raspberry Pi 4 Model BHere are the highlights:A 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU (~3× performance)1GB, 2GB, or 4GB of LPDDR4 SDRAMFull-throughput Gigabit EthernetDual-band 802.11ac wireless networkingBluetooth 5.0Two USB 3.0 and two USB 2.0 portsDual monitor support, at resolutions up to 4..
$0.00
Power input: +20V - +7VPower output: 5V/1A, 5V/5A, 3.3V/1AControl steering gear channel: 24Communication input: TTLActuator drive resolution: about 5US, about 0.45 degreesBaud rate setting: 115200Driving pulse range: 2500 - 500 Hardware protection:A)dual power supply voltage, one for the power supp..
$65.00
Features:1.Pin configuration is compatible with S4A (V1.5).2.Arduino Pro Mini 328 5V 16mhz Bootloader.3.ATmega328P processor @ 16MHz with 32K FLASH, 2K SRAM and 1K EEPROM.4.Dual motor driver rated at 2.5A per motor.5.Motor controller pins can be isolated and used as standard digital and PWM pins.6...
$21.99
MCU: ATmega8A, Frequency: 16MHZInput voltage range: 5.4V ~ 9VLow dropout voltage: 250mV @ 500mA, 450mV @ 1AOnboard high-performance dual 2A independent MOSFET H-bridge motor driverAn external PWM control signalBluetooth module interface (standard Otani Electronics Bluetooth module) can be used wit..
$19.99
The micro Magician robot controller is the perfect choice for small/low voltage robot projects.It can be programmed using a USB cable and the Arduino IDE, which is free from the internet.The controller comes with the LillyPad(168) bootloader. Each unit comes pre-assembled and tested. Supplied in an..
$32.99
DESCRIPTION: The T’Rex controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. This controller combines an Arduino development board with a dual FET H-bridge motor driver. The heart of the board is an ATMega328P AVR microcontroller whic..
$99.99
Product Parameters: ATmega2560 16MHz CPU 256K flash memory, 8K SRAM and 4K EEPROM USB interface and ISP socket (CP2102)  Built in 3A switch mode power supply 70 I/O pins with male and female headers Support for up to 48 servos 16x 10bit analog inputs 15x 8bit PWM outp 1xI2C ..
$48.99
This compact PCB is just 95mm x 70mm (3.75inch x 2.75inch) and is a perfect companion for the Spider robot controller.These outputs are suitable for interrupt generation and high resolution speed control.The mixing circuit takes the 8 inputs of the 4 quadrature encoders and generates 4 outputs. As ..
$28.88
The request of our customers we have now produced a high current, solid state switchfor use with Wild Thumper products. Although designed specifically for the Wild Thumper chassis’s this switch can be used with any robot that needs to switch high currents.Solid state switches are small, quiet, have ..
$22.99
The Eplorer PCB provides your 2 motor Rover 5 chassis with a convenient interface to your controller. The PCB includes motor drivers with current sensing, 5V and 3.3V regulators, IR sensors on the corners. There are mounting holes for popular Arduino PCBs, breadboards and a pan/tilt kit. A large pr..
$46.88
Showing 1 to 19 of 19 (1 Pages)