1, the use of customized ultra quiet high-speed built-in fan motor;
2, the base uses the jet anode oxidation treatment;
3, using the European standard aluminum T type inner groove;
4, motor speed: 20000 RPM / min;
5, input voltage / current / power: 12V/3A/36W, switching power supply to the voltage of 240V - 110V;
6, transformer with over current, over voltage, over heat protection;
7, saw table area: 120mm x120mm;
8, Ma Daxiang, spindle box, middle block, wire box, base, gear, side cover machine, wire saw, connecting block, axis, belt protection cover used in all metal structure, body of plastic parts.
1, the main parts of the electroplating process or ink jet anode oxidation process.
2, can be a straight line, the curve of arbitrary cutting;
3, saw the plate down whole stalk, with convenient retractable screw fixed structure, without the use of any tools it can be under the adjustment and fixing and adjusting rod;
Has 4, machine safety not to hurt the hand design, zigzag across the skin will only cause a slight vibration, safety not to hurt the hand, can not be cut, saw the largest sawing depth: Hardwood 4mm, plywood 7mm, cork 18mm, thin aluminum plate 0.5mm, organic glass 2mm;
5, to prevent the hole screw slide, the connection block using the square nut, improve the stability and service life of the connection block;