drilling machine ROHS

$255.00
Brands DAGU
Product Code: DY009
Availability: In Stock

1.customized ultra quiet high-speed built-in fan motor

2.the base uses the jet anode oxidation treatment;

3, using the European standard aluminum T type inner groove;

4, the swing arm embedded into the hole;

5, spindle box, Ma Daxiang, a hand wheel, a gear, small slider, long slide, connecting block, three claw chuck (optional metal four jaw independent chuck), belt protection cover, tool clamping claw with all metal structure, fuselage without plastic parts;

6, motor speed: 20000 RPM / min;

7, input voltage / current / power: 12V/3A/36W, switching power supply to the voltage of 240V - 110V;

8, transformer with over current, over voltage, over heat protection;

9, X axis slider stroke: 150mm;

Chuck: 1mm-6mm, 10;

11, drilling table area: x120mm 120mm;

12, suitable for processing: wood, soft metal (gold, silver, copper, aluminum), organic glass, plastic, etc..

Product features:

1. The main parts of the machine tool are electroplating process or the ink jet anodic oxidation process;

2, Z axis, X axis hand wheel, Y axis hand wheel are using electroplating process, with 0.02mm accuracy of the calibration line (scale line for the mold a molding, non paste), increase the accuracy of machine tool processing workpiece;

3, the machine tool using 3/4 semi structure, convenient disassembly and assembly machine connecting block;

4, the machine floor board with scale line, the workpiece can be machined accurately and fast;

5, main parts of machine tools by electroplating technology, such as metal electroplated belt cover, a metal plating handwheel, metal plating drill platen, metal plating slider etc.;

6, chuck tool by hexagon nut fixed design, add clamping tool (such as drill bit, milling cutter) fastening degree, and improve the safety of operation;

7, the small slider, large slider side with anti loose nut design, prevent the machine used in the process of vibration caused by too large gap, improve the processing accuracy;

8, the right left side of the middle block of the electroplating metal is provided with a U type hole of the machine arm;

9, to prevent the hole screw slide, the connection block using the square nut, improve the stability and service life of the connection block;

10 and a connecting block adopts the dovetail type structure, and machine tool parts of each slot phase matching, improve the stability and machining precision of the machine tool;

11, the machine adopts safe corner processing technology, to prevent the skin from scratch.


Write a review

Note: HTML is not translated!
    Bad           Good
Tags DIY tools