Milling machine ROHS

$294.00
Brands DAGU
Product Code: DY008
Availability: In Stock

Technical parameter:

1, the use of customized ultra quiet high-speed built-in fan motor;

2, the base uses the jet anode oxidation treatment;

3, using the European standard aluminum T type inner groove;

4, the swing arm embedded into the hole;

5, spindle box, Ma Daxiang, a hand wheel, a gear, small slider, long slide, connecting block, three claw chuck (optional metal four jaw independent chuck), belt protection cover, tool clamping claw with all metal structure, fuselage without plastic parts;

6, motor speed: 20000 RPM / min;

7, input voltage / current / power: 12V/3A/36W, switching power supply to the voltage of 240V - 110V;

8, transformer with over current, over voltage, over heat protection;

9, X axis slider stroke: 150mm;

Chuck: 1mm-6mm, 10;

11, vice clamp clamping dimensions: 50mm;

12, suitable for processing: wood, soft metal (gold, silver, copper, aluminum), organic glass, plastic, etc..

Product features:

1. The main parts of the machine tool are electroplating process or the ink jet anodic oxidation process;

2, hand wheel using electroplating process, with 0.02mm accuracy of the calibration line (scale line for the mold a molding, non paste), increase the accuracy of machine tool processing workpiece;

3, the machine tool using 3/4 semi structure, convenient disassembly and assembly machine connecting block);

Size 4, metal plating vice: 80mmx47.5mmx25mm. Clamping size: 50mm*50mm, the largest holder of 50mm objects. Die vise (non paste) forming a scale line positioning line, convenient positioning processing;

5, main parts of machine tools by electroplating technology, such as metal electroplated belt cover, metal plating handwheel, metal plating vice, metal plating slider etc.;

6, the machine adopts six collet nut fixed clamping tool (such as design, increase the tightness of the drill bit, milling cutter);

7, the small slider, large slider side with anti loose nut design, prevent the machine used in the process of vibration caused by too large gap, improve the processing accuracy;

8, the right left side of the middle block of the electroplating metal is provided with a U type hole of the machine arm;

9, to prevent the hole screw slide, the connection block using the square nut, improve the stability and service life of the connection block;

10 and a connecting block adopts the dovetail type structure, and machine tool parts of each slot phase matching, improve the stability and machining precision of the machine tool;

11, the machine adopts safe corner processing technology, to prevent the skin from scratch. 



Write a review

Note: HTML is not translated!
    Bad           Good
Tags DIY tools